- Steering:Powered, Depowered or Custom?
- De-powering the steering rack, plus more to come on rebuilding wrx parts
- Belt tensioner avail for no air conditioning or power steering???
- Compatable steering racks
- 818R brakes and aero questions
- Keep the ABS brakes on the 818R?
- Steering & Brakes...Notes from the Road & Track Article.
- Making a 818SR from an 818S with an 818R Koni Suspension set at 4" - Questions
- Any pricing on wilwood brakes?
- New CV Boots, an 818 must.
- Impact of Whiteline anit lift bushings on 818
- My personal and professional recommendation for a steering wheel hub adapter
- Lets talk about aftermarket suspension parts
- Centering wheels in the wheel wells
- Adjustable suspension for the street
- Koni shock issue
- Power brakes
- Missing bolts and holes that don't line up.
- Has anyone noticed how little you can turn the wheel before it hits the frame,ect.
- Not enough adapters?
- Rear lower cam bolts
- 818 Recommended Tire size for the front
- aluminum lower control arm question
- Front knuckle to upper A arm adapter
- brake line connections at the master
- What would need to be done to modify STI spindles to work with the 818?
- What hub for FFR steering wheel?
- Subaru ABS CAN bus question
- Spring rates, higher rate in the front?
- ABS plumbing
- So... I Bought The Aluminum LCAs
- Control Arm Bolt Question.
- Don't Laugh Please: basic typical suspension travel question.
- Rear supension solutions
- Possible rear sway bar solution
- Talk to me about flaring brake lines
- 818S ABS brakes
- Brake routing suggestions- Post your pics
- 818 uses Subaru outer CVs?
- KONI height adjustability
- A little confused about front upper Control Arm...
- 4 wheel disk brakes
- Aftermarket rear sway bar, will it work on the front of the 818s?
- Power booster clevis/nut for what use?
- Nominal Suspension geometry
- Anyone know the Front Upper Ball Joint Torque spec?
- Rear knuckle question
- Swaybar bracket
- Steering wheel adapter?
- alignment specs??
- steering rack
- Use late model STI front, lower control arms?
- Best shocks for 818R
- Rear lateral control arms
- Wagon donor, LCA position, and steering
- Changing wheel bearings
- Aftermarket Steering Rack?
- Remote brake/clutch reservoir
- Anybody pressing their own bearings and bushings?
- Front brake line tabs
- Help with Rear Suspension
- Ball joint replacement
- anyone planning to use an aftermarket steering col? such as flaming river or IDIDIT?
- Front lower ball joint for aluminum control arm - Part #
- Front LCA Torque Question
- Can STI front lower control arns be used on the 818
- Steering Rack Question
- New Aluminum LCA Question
- Alignment before or after body mounting?
- FFR Steering wheel installed
- Wagon sway bar mounting?
- Lighter, race oriented Suspension Parts, Primarily Uprights
- Solving an odd Steering Rack problem
- Steering Column Removal
- Suggestions for LCA bushings??
- Wilwood rear brake kit fitment issue
- Another aluminum lower control arm question
- Four Piston Wilwood Brake Lines
- Steering Rack U-Joint Size/Splines?
- Basic steering rack question
- Suspension parts verification
- after market rear LCA fittings/bushings
- Eastwood Brake Tools sale
- What sway bar mounts?
- ABS results from the trailblazers?
- Help! Front Lower control arm rear bolts
- STI steering rack diameter vs WRX
- Rear drums direct swap for discs?
- IRS bracket M14 x 55? missing hardware?
- Bushing the top front spindle strut cam bolt mount hole.
- Rear transverse link mounting question.
- OEM Brake upgrades
- Braided Stainless Steel Brake and Clutch Line kit - From The Race Line
- Early model steering rack, spacers and manual revisions.
- Anyone interested in a Stop-Tech brake kit?
- VCP Wide Wheel Trailing Arms
- Front shock mount and control arm question
- Works Bell Hub, QR and FFR Steering Wheel install
- Adjusting rear toe-in?
- Sway bar size?
- Power Booster Cover Plate
- Aftermarket Brake Upgrades and Brake Philosophy
- front lower control arm question
- Brake master cylinder mounting question.
- ABS Module Mounting Question
- ABS & Proportioning Valve Question
- 818 new axle assembly question
- '05 and Later Rack Question
- Do we need the strut mounts?
- Is this steering column bracket needed?
- Which e-brake cable is the longer one?
- Rear lateral links
- upper control arm zerks up or down?
- How many builders will be using the stock brake setup?
- 2008+ rear sway bar
- How much brake bias needed for the 818
- Brake lines and ABS
- Aluminum LCAs and the locknuts which ate them
- DBA Rotors now available from The Race Line
- Rear wheel bearing with orange plastic insert?
- Turn in Concepts Super Sexy Suspension Bushing Group Buy
- FFR Wilwood Pedal Box Option
- Top Rear Shock spacers
- Steering column bump
- bump steer kit
- Rear brake line routing- Center tunnel
- Brake flaring tool
- Which shocks are front and rear?
- Shock spacer shims 13210 look like what?
- Front UCA - 2 generations?
- How to adjust Koni single adjustable shocks
- steering wheel and adapter needed who sells them for subaru?
- NRG Steering Wheel Adapter Question
- Do not make the same goof up I did.
- Need help fitting LCAs
- Steering rack lines
- Completing front LCA install... Torque Specs and Nuts?
- 818R suspension on a 818S
- Brake line adapters
- Anchoring emergency brake lines
- Hanging the rear spindle
- Pictures of steering rack mounting - 02-04 wrx
- Safety Wiring Brake Rotor Bolts
- Telescoping / Telescopic Steering Column
- VCP Track Pack rod end lateral and toe link kit.
- Roll bar interference?
- Repacking New Wheel Bearings... Opinions???
- Wilwoods or Brembos on 818 without brake booster
- Shock Tower Brace
- 2006 front aluminum control arm cleanung
- ABS install
- Hand brake cable clearance?
- Power Brakes on 818S
- Aluminum LCA, worth it?
- Center of Gravity Height
- Critique my safety wiring
- Brake bias starting point
- Front lower control arm access hole
- How to crimp steering boot bands?
- wheel bearing and seal questions
- Wanted: Front Wheel Speed Sensors and Tone Wheels / Rings
- ARP Stud Help
- Anyone else in need of Stainless Steel brake lines?
- Lower Front Shock Mount
- Wagon vs Sedan suspension parts
- Pedal box M10 x 25 bolts/nuts?
- What years steering racks fit best
- looking for used or remanufactured 2006 front and rear calipers
- Rear Wilwood Brake Alignment
- Rear Trailing Arm Bushing
- Rear spindle compatibility
- Master Cylinder selection for Wilwood pedals
- Rear Suspension set up pointers
- Front/Rear suspension/rack full torque specs
- Strange? anyone else see this?
- Front tires rub. What did I do wrong?
- Will this flare leak?
- Front or rear brake bias adjustment?
- Brake lines--what am I doing wrong?
- Brake and clutch mods for RHD
- brake/clutch master cylinder support
- Brake Line Routing
- Any ABS updates? Anyone have it working?
- Steering wheel
- New 4 Pot and 2 Pot Subaru Calipers for sale
- Inverting the Konis?
- Trick to install longer wheel studs???
- mounting the swaybar
- Wheel bearings: stock or aftermarket?
- Time to torque?
- Lateral link lengths?
- Steering column problem
- Rear Suspension question
- Accelerator Pedal
- Need Input for custom manual steering rack design
- installed spring heights
- Double-adjustable Konis
- Brake Bias Valve
- 6 Piece Rear Arm Kits - The cat is out of the bag
- Ride height, with or without weight?
- Cut the new style upper control arms?
- The nice Eastwood brake flaring tool is on sale again
- ABS Control Module Location
- Steering Column: Exposed!
- Front Ball Joint Discussion Thread and Potential Safety Concern
- Brake Rebuild
- R steering knuckle ?
- Two disturbingly dangerous discoveries this morning
- 2015 STI Steering Rack in an 818?
- Front knuckle/hub redesign
- stock rear lower trailing arms and links
- Steering rack mount
- Quick S and R koni question
- Brake Lines with Wilwood Kit
- Front suspension alignment
- Double-adjustable Koni settings
- Good angle gauge
- pedal box bracket?
- collapsing the steering column link?
- linear actuated parking brake?
- Bent Lateral Link Arm?
- Steering column full lock turn bumps/stoppers
- Willwood pedal assembly?
- Anyone keeping the power steering?
- Lower control arm - front bolt doesn't fit
- Aftermarket donor CVs?
- Donor brake line dont fit the FFR mount tabs.
- installing a sway bar in the rear?
- Parking Brake Assembly help
- FS: Sedan Front LCAs pre-drilled - $80 shipped
- Brake effort?
- Trailing Arm Alignment
- Throttle cable guide
- Braided Steel Brake and Clutch Line Kits
- Ebrake cable spindle securing clips installation
- Ebay suspension arm kits
- Spring sizes?
- aftermarket steering wheel
- Axle Nut Question
- Brake/clutch fluid recommendations?
- LCA torque values
- Wilwood pedal box added clearance?
- Bump steer
- Sway bar bushings?
- Bleeding the brakes
- How to remove the front outer CV joint from the half-shaft (2006 WRX)
- Rear suspension alignment
- Rear CV Assembly - Lost Ball Bearing :(
- Rear CV Assembly - Ball Joint Not Fitting?
- Ride Height--Can I Go Higher?