Quiny
07-25-2014, 01:14 PM
Just started brake lines and noticed that FFR sent 1 all female Tee and one Tee that has one male side. Any reason for this? I can make it work with a coupler but I really like to eliminate any extra connections. I have been re-flaring so that I do not need any adaptors.
31764
Quiny
07-25-2014, 01:44 PM
My assumption is that you thread it directly into the out port on the proportioning valve.
Jim Schenck
07-25-2014, 01:56 PM
If you mount the Tee in the right spot you can attach the male end to the left front flex line (with an adapter if its factory line or no adapter on most braided lines) That should give you the least amount of connections.