PDA

View Full Version : ABS Control Module Location



Hindsight
10-13-2014, 10:06 AM
Can someone confirm that on the WRX (my donor is an '07), the ABS computer is attached to the ABS solenoid module, and that there is no other ABS computer inside the vehicle anywhere? I'm used to seeing a separate ABS computer inside the vehicle somewhere.

Jaime
10-13-2014, 10:23 AM
My '05 had an ABS controller below the radio.

matteo92065
10-13-2014, 10:48 AM
The '06 is all contained in the "ABS control module and Hydraulic control unit (ABSCM&H/U)"
This is a good time to look at the factory manual. It shows all the pieces and has good descriptions and the what & where of all things.

Hindsight
10-13-2014, 10:51 AM
Thanks guys. I looked at the wiring diagram in the factory manual and it appeared to show the hydraulic unit and the ABS computer were one and the same but it's difficult to fully understand physical locations based on wiring diagrams so I just wanted to fully confirm.

Bob_n_Cincy
10-13-2014, 11:12 AM
Here is a couple of pictures to help you out.
34604

34605

Goldwing
10-13-2014, 04:07 PM
I have an 07, yes it's all one unit. Just don't forget the g sensor in the center console.