Here's my timing table if it helps. I had to go down to 12 degrees at idle to get the idle under 800 due to the big lopey cam I'm running.
Base Spark Table.jpg
Spark Landscape Graph.jpg
Visit our community sponsor
Thanks: 27
Likes: 274
Here's my timing table if it helps. I had to go down to 12 degrees at idle to get the idle under 800 due to the big lopey cam I'm running.
Base Spark Table.jpg
Spark Landscape Graph.jpg
My build thread https://thefactoryfiveforum.com/show...Roadster-Build
Thread on Stainless Steel AN brake lines.
Thread on fasteners and torque wrenches.
Thread on Wilwood & Tilton master cylinders
cv2065 liked this post