CV2065 MKIV Roadster Build Thread #2 - Visors - Heat Shields - Saggy Pipe

[cv2065]

As an update to my fuel issue, I made some float and accelerator pump arm adjustments. We'll test it out tomorrow. Roush recommends Ported vacuum over Manifold, which is how the carb is setup now. I'm thinking of changing over to Manifold but we'll see.

Update: Ride went good this morning, although it was cool and hard to get to 180. Will take it back out when it warms up. I did move my linkage rod to the bottom linkage hole so that it would activate sooner, but not liking that. Challenge is that I want full throw of the linkage without my pedal being too high.