3D Printed Parts

[Mike.Bray]

I was asked about a custom horn button to replace the center FFR medallion. Pretty rough but you get the idea.

exampl1.JPGexampl2.JPG

I did a couple horn buttons in aluminum.

20240408_142232 (Medium) Rotated.jpg

20240528_113048 (Medium) Rotated.jpg

20240423_102301 (Medium) Rotated.jpg

20240517_101203 (Medium) Rotated.jpg

I also 3D printed ducts for my footbox cooling fans.

20240321_104322 (Medium) Rotated.jpg

And a jack cradle for the 4" round tube so it's more secure when jacking.

20240604_162503 (Medium) Rotated.jpg