M22 Cobra Build - Tailpipe mock-up/ rear sheet metal

[i.e.427]

I do need to go back and rewatch to get the connector you used, unless you made a custom 3 pin weather pack to mount to the harness.??

This may save you the trouble. Fan Connector: https://www.rockauto.com/en/moreinfo...t=2556&jsn=597
You're also going to need to run a higher amp relay: https://www.waytekwire.com/product/e...4aAqQzEALw_wcB
And make sure to upsize your wire to #10.