CV2065 MKIV Roadster Build Thread #2 - Visors - Heat Shields - Saggy Pipe

[cv2065]

And now for a little polish. Gets better with every video. I have now rented my truck and enclosed trailer and will be on my way on Friday March 20th to pick it up. YES!!

https://hosting.photobucket.com/239a...f2b651d829.mov

The only thing I have to figure out is if Mike can get the 3" Roush air cleaner to fit under the hood by massaging the cutout. I have the Victor Jr. intake which is giving it a little challenge on the height side. I didn't have to deal with that on the last build as the traditional long Cobra filter fit with the hood down as I had a low profile intake. Had I thought about it earlier I probably would have tried another option and went with a larger hood scoop from Shell Valley Cobra to accommodate for the air cleaner. If this doesn't work then I suppose I can get a drop base air cleaner plate for the Roush air cleaner and/or drop from a 3" filter to a 2.5" or 2.25" depending on what they make for the 15" oval. Or grind down the one that I have. March Performance also has some low options but they are very pricey. I have no desire to change out the engine mounts and the round air cleaners just aren't very sexy.

Either way, we'll get it handled.