View Full Version : Wayne Presley/VeryCoolParts Build Thread H6 power
Hindsight
11-22-2016, 08:08 PM
Nice job Wayne... I bet the sound is totally worth it. Seems the torque peak is kinda high in the RPM band though.... could it come down with some more tuning and adjustment?
Canadian818
11-22-2016, 09:52 PM
Good work as always Wayne! I'd be interested in the clutch depending on the details of course. I need a pull-type clutch for the 5mt in the 340ft/lbs range.
Wayne Presley
11-22-2016, 10:53 PM
Nice job Wayne... I bet the sound is totally worth it. Seems the torque peak is kinda high in the RPM band though.... could it come down with some more tuning and adjustment? The peak torque follows the boost curve, If I went with a smaller AR on the turbine housing it would lower the peak torque RPM a few hundred RPM.
Good work as always Wayne! I'd be interested in the clutch depending on the details of course. I need a pull-type clutch for the 5mt in the 340ft/lbs range.
It's a pull type stage 3 rated at 485 TQ, new they are $620, I'll sell it for $390
Canadian818
11-22-2016, 11:52 PM
It's a pull type stage 3 rated at 485 TQ, new they are $620, I'll sell it for $390
That's probably heavier duty then I need, but the price is right. I'll take it, pm me how to proceed.
Wayne Presley
11-23-2016, 10:50 PM
I'll get out on Friday
Canadian818
11-23-2016, 11:21 PM
I'll get out on Friday
Thanks, whenever it's convenient is fine, won't be installed for months.
fastfox
11-26-2016, 04:22 PM
There's TONS of air left in that turbo too!
Wayne Presley
11-27-2016, 10:56 PM
There's TONS of air left in that turbo too!
Yes!
alpine227
08-29-2017, 12:39 PM
Have you found any need for additional case ventilation with pcv or extra breathers on the valve covers?
Wayne Presley
08-29-2017, 05:53 PM
No I haven't needed any extra breathers
vicious_fishes
11-16-2018, 06:59 AM
I'm looking to turbo my H6, very interested to know exactly what turbo it is/for a spool plot/picture of the exhaust manifold and charge pipes?