That's a sharp color scheme!
Visit our community sponsor
Thanks: 148
Likes: 265
That's a sharp color scheme!
Blitzboy54 thanked for this post
Agree with Jeff! Plan A.
Scott Pregont
Present build: 65 Daytona Coupe #393 - Forte 427 EFI crate w/TKX 2.87/ .81 - Ordered 11/16/21 - Delivered 6/23/2022
Location: Mechanicville, NY
Build Thread: https://thefactoryfiveforum.com/show...na-Coupe-build
My Albums
Build album: https://thefactoryfiveforum.com/album.php?albumid=2151
Build album 2: https://thefactoryfiveforum.com/album.php?albumid=2437
Special Tools, Custom Parts, misc supplies: https://thefactoryfiveforum.com/album.php?albumid=2045
Garage Pics: https://thefactoryfiveforum.com/album.php?albumid=2041
POR15 First Try: https://thefactoryfiveforum.com/album.php?albumid=2068
Silicone application tips: https://thefactoryfiveforum.com/album.php?albumid=2063
Blitzboy54 liked this post
Wow Jessie, it's going to be a stunner. I'm with Jeff on the front spoiler. If it were a two color, black and whatever color, the solid color would work but with your color combo, definitely tie it all together. Can't wait to see it dressed and ready to go out on the town!
MKIV Roadster - #9380 - Complete Kit - Delivered 7/17/18 - SOLD 5/2023
Build Thread #1: https://thefactoryfiveforum.com/show...V-Build-Thread
MKIV Roadster - #10827 - Complete Kit - Delivered 11/6/23 - Final Punch
Build Thread #2: https://thefactoryfiveforum.com/show...Build-Thread-2
Blitzboy54 liked this post
That will look sick! Wow!
Blitzboy54 liked this post
Off to Paint
If you go back to my first build thread when I took my car off for paint I took this pic then complained that I forgot to take pics of it at Ron's shop.
Well 4 years later I did the exact same thing. I pulled the car into Ron's shop, talked for 45 minutes about what exactly I wanted to do and didn't take a single photo lol. So I will leave you with these.
New Tahoe, new build same journey. The drive was uneventful and Ron was great. He does a lot of Backdraft's in the New Haven area so he is very familiar with the chin spoiler. He gets the assignment. It's looking like early June for completion (give or take) so I will post updates as they arrive. I am also installing hood vents so I am real excited to see how that turns out.
Boys night out in New Haven, started at Frank Pepe's for pizza, went to a few different distilled spirit serving establishments and finished the night at a cigar bar and howled at the moon.
I am very tired but excited to move back onto the truck full time.
Build 1 MK4 #10008 - Delivered 03/03/21, Graduated 7/20/22 - Sold 6/6/24 Build Thread #1 https://shorturl.at/K9fuy
Build 2 MK4 #11061- Delivered 08/24/24 Build Thread #2 https://shorturl.at/OZowi
Build 3 35 Pickup #329 - Delivered 10/28/25 Build Thread #3 https://shorturl.at/Ty4QQ
Congrats, Jesse! Awesome milestone, and I can't wait to see your color selection in real life!
Greg
Built an early MkIII years ago, sold years ago. Back after 18 years to build a MkIV
Build Thread Here Partners: Levy Racing, Summit Racing, LMR, Breeze, Forte's Parts, Speedhut, ReplicaParts
MkIV Complete Kit Ordered 4/18/23, Delivered 7/11/23, First start 3/15/25. Legal 6/13/25. Boss 427W, Edelbrock Pro Flo 4, TKX (.68 5th), IRS, Wilwood Brakes, 18" Halibrands, Toyo R888R Tires, Custom Speedhut Gauges
Blitzboy54 thanked for this post
New paint colors on the house as well![]()
MK4 complete kit Nov 2024, Blueprint 347, TKX, Hyd clutch, IRS, 3.55, touring shocks, 17" wheels, 11.65 brakes, Build Thread
Blitzboy54 liked this post
Yeah, that's right. Funny story about the house. My wife and I bought in in 2008, it was a total fixer upper in a great neighborhood. We picked colors that looked a lot like a fall leaf. Burnt orange was the goal. After I got all the really hard to get to places painted we were like "Whoa, that's really orange". I was kind of pissed and had already bought 10 gallons. I ran upstairs and grabbed the color tile and was then like "We got screwed, this isn't even close!"
I took the tile outside and held it against the house it was a perfect match. It looked totally different in the sun. Lesson is your house lives outside, plan your colors accordingly. So we ran with it. Finally after about 10 years it needed a new coat so we changed up the color to something I like to call more "resale-able".
The orange grew on us but I was happy to see it go.
Build 1 MK4 #10008 - Delivered 03/03/21, Graduated 7/20/22 - Sold 6/6/24 Build Thread #1 https://shorturl.at/K9fuy
Build 2 MK4 #11061- Delivered 08/24/24 Build Thread #2 https://shorturl.at/OZowi
Build 3 35 Pickup #329 - Delivered 10/28/25 Build Thread #3 https://shorturl.at/Ty4QQ
PMD24 liked this post
As a retired color matcher there are three rules to understand: 1) ALWAYS look at the color under sunlight. It will look totally different under any other light source. (Hate to say it as I am an old male, but) 2) Female eyes see color better than male eyes 3) Young eyes see color better than old eyes. I was lucky that I had the use of a color booth that had different light sources and a colormatching computer. Without those my colormatching days would have been over a lot sooner!
Scott
Scott Pregont
Present build: 65 Daytona Coupe #393 - Forte 427 EFI crate w/TKX 2.87/ .81 - Ordered 11/16/21 - Delivered 6/23/2022
Location: Mechanicville, NY
Build Thread: https://thefactoryfiveforum.com/show...na-Coupe-build
My Albums
Build album: https://thefactoryfiveforum.com/album.php?albumid=2151
Build album 2: https://thefactoryfiveforum.com/album.php?albumid=2437
Special Tools, Custom Parts, misc supplies: https://thefactoryfiveforum.com/album.php?albumid=2045
Garage Pics: https://thefactoryfiveforum.com/album.php?albumid=2041
POR15 First Try: https://thefactoryfiveforum.com/album.php?albumid=2068
Silicone application tips: https://thefactoryfiveforum.com/album.php?albumid=2063
tnt_motorsports liked this post
Namrups liked this post
Females have more cones than males.
My build thread https://thefactoryfiveforum.com/show...Roadster-Build
Thread on Stainless Steel AN brake lines.
Thread on fasteners and torque wrenches.
Thread on Wilwood & Tilton master cylinders
I see what you did there
Seat fix
One of the things I found about my Intatrim seats during my shakedown rides was they are (at least for me) a little thin in the seat. My tail bone would start to hurt after a while. So to address this I found a local upholstery shop to help re work them.
This is how they looked as shipped.
and now
Also since I have nothing to do with my MK4 I wanted to make the door straps and accent piece. I tried orange dye and it didn't look right so I went with this orange leather paint. I like it, if it cracks down the road I will re do them and dye them black.
![]()
Build 1 MK4 #10008 - Delivered 03/03/21, Graduated 7/20/22 - Sold 6/6/24 Build Thread #1 https://shorturl.at/K9fuy
Build 2 MK4 #11061- Delivered 08/24/24 Build Thread #2 https://shorturl.at/OZowi
Build 3 35 Pickup #329 - Delivered 10/28/25 Build Thread #3 https://shorturl.at/Ty4QQ
cv2065 liked this post
Looks like they added a good amount of additional padding to the seat bottom. Hoping that solves your comfort issue.
For once I really wasn't trying to do something! I've always heard women have more cones than men so they see colors better and I believe it. My wife would see differences in the spray outs we had done that I didn't even notice.
Cones.jpg
My build thread https://thefactoryfiveforum.com/show...Roadster-Build
Thread on Stainless Steel AN brake lines.
Thread on fasteners and torque wrenches.
Thread on Wilwood & Tilton master cylinders
I know that's scientifically true but somehow my wife missed that boat! When I've been building our houses and have wanted her input on color choices for various rooms she was completely the opposite...we'd be look at colors and she'd ask what I thought of something that she selected and invariably I'd say something like "that has too much gray/green/brown/whatever" and she'd look at me like I had 2 heads and ask "where do you see the gray/green/whatever in that?" Maybe it's because of what I do that I'm more tuned into shades and hues whereas she just sees horsesWe decided that when it comes to color she's like the 6 crayon box that they gave us in kindergarten and I'm more like the box of 96---with the built in sharpener!
Jeff
My build thread https://thefactoryfiveforum.com/show...Roadster-Build
Thread on Stainless Steel AN brake lines.
Thread on fasteners and torque wrenches.
Thread on Wilwood & Tilton master cylinders
First body work shots
I got my first body work shots. Nothing too fancy here accept they were texted to me and I forgot to see how they were oriented before I uploaded them. Fun surprise, the forum now auto orients them correctly! YAY
Anyhoo, they are going to align the scoop then move on to the vents. I was told the body is in pretty good shape and they haven't found any voids.
![]()
Build 1 MK4 #10008 - Delivered 03/03/21, Graduated 7/20/22 - Sold 6/6/24 Build Thread #1 https://shorturl.at/K9fuy
Build 2 MK4 #11061- Delivered 08/24/24 Build Thread #2 https://shorturl.at/OZowi
Build 3 35 Pickup #329 - Delivered 10/28/25 Build Thread #3 https://shorturl.at/Ty4QQ
There you go! Surprised to see this stage being done on the chassis but more than one way to skin the proverbial cat *⬛
Jeff
Yeah it freaked me out the first time but I can’t argue with the results. He’s thinking mid June, I’m fully prepared for it to take longer if need be. There is an annual rally in Lake George 2nd week in July I would love to debut it.
Fun fact, I thought I got one of “those body’s” as you would say but Ron asked me if I had hand picked it because he had t seen one that clean before. I was a little surprised cuz there are def some fitment issues. He was like that stuff is easy to fix but there are zero voids.
It’s funny how a customer and a pro look at these things differently.
Build 1 MK4 #10008 - Delivered 03/03/21, Graduated 7/20/22 - Sold 6/6/24 Build Thread #1 https://shorturl.at/K9fuy
Build 2 MK4 #11061- Delivered 08/24/24 Build Thread #2 https://shorturl.at/OZowi
Build 3 35 Pickup #329 - Delivered 10/28/25 Build Thread #3 https://shorturl.at/Ty4QQ
On your way! Can’t wait to see the end result. Did you get a approx timeline of completion?
MKIV Roadster - #9380 - Complete Kit - Delivered 7/17/18 - SOLD 5/2023
Build Thread #1: https://thefactoryfiveforum.com/show...V-Build-Thread
MKIV Roadster - #10827 - Complete Kit - Delivered 11/6/23 - Final Punch
Build Thread #2: https://thefactoryfiveforum.com/show...Build-Thread-2
Do you know what is the clear gel in the body seams? Some sort of epoxy filler?
Jen
MK4 complete kit, IRS, Ford Strokers 347 (carb & mechanical fuel pump), TKX, PS, heater-defroster-wipers, firewall forward, 11.65 rear brakes, 17" Halibrands, #11124.
Ordered: 9.8.2024
Delivered: 10.31.2024
Build 1 MK4 #10008 - Delivered 03/03/21, Graduated 7/20/22 - Sold 6/6/24 Build Thread #1 https://shorturl.at/K9fuy
Build 2 MK4 #11061- Delivered 08/24/24 Build Thread #2 https://shorturl.at/OZowi
Build 3 35 Pickup #329 - Delivered 10/28/25 Build Thread #3 https://shorturl.at/Ty4QQ