Quote Originally Posted by CW_MI View Post
My Breeze billet steering rack bushings came in, so I could finish installing that....my kit shipped with one missing.
Funny, I was also only sent 1 of the 2.45" steering rack spacers, among a few other little things for the dash. I called and spoke with Nick at FFR to make note of these discrepancies with hopes of them shipping them out right away. After a week went by I emailed Nick with a list of the missing parts to confirm and see if they were going to get shipped out. It took a week to get a response and he just said "I will check those items against what we spoke about and make sure all the lists check out correctly!" That was about 3 weeks ago. I was really hoping to get that spacer sent out as its the only thing keeping me from getting the steering rack all installed. Guessing they're just going to add those missing parts to a future shipment coming my way of items that were out of stock (wiring harness, wheels, dash, driveshaft......). Do you have the part number you ordered from Breeze? I'm not seeing it on their website.
Also, did you adjust your UCAs to any specific length? I went to the build school and they showed us a picture (I think it was from a Mk4 manual) that showed lengths for initial adjustments. I also found posts on there of initial measurements and when I adjusted to those lengths, it had a large negative camber (I believe that's that term when they're tilted inward at the top). Your picture looks close to where I took them out to just going off the amount of threads showing on each end of the UCAs to get the hubs looking close to vertical.