The last one! #538 is getting V12 and RHD

[VRaptor SpeedWorks, LLC]

Looks like the entire oil pan is above the chassis tube? So you have 1.5" to work with to make that part of the pan deeper where the chassis isn't in the way?

[DopeOfWelding]

Looks like the entire oil pan is above the chassis tube? So you have 1.5" to work with to make that part of the pan deeper where the chassis isn't in the way?

It's roughly 1/2" above the chassis tubing now. The pan I printed is the file supplied to me from the company that makes the actual part, they were cool enough to send me the file to let me print the mock up pan. I don't have any plans on changing it or designing my own. They exclusively do M120s , R&D and tested it. So I'm running it as is. It also looks deceiving because the crank centerline is probably a good 3" up in the block, making the pan appear much more shallow than it really is.

Attachment 217237