Thank you for the responses and the pictures! I got ready to do the installation and turned out that the bolts I got from BluePrint are shorter, they must be for an engine without brackets and spacers for alternator and power steering. Quite the weird mix, 7 bolts, 5/16''-18 with the following lengths and materials:

- 1 x 6-1/4'', (YFS/12.9) steel
- 2 x 6'', stainless
- 3 x 4'', stainless
- 1 x 2-3/4'', stainless

I was able to find all of them except the only non-SS one. Here's how they look:

tgPIFWZh.jpg

I wanted to confirm that I should put a dab of anti-seize on the stainless steel ones, but what about the other one? It was really caked in something that I can't tell what it is.