MK5 Alabama Build

[BamaFord]

I thought I would start a build thread while I wait for the car to arrive. My name is Greg and I live in Alabama. Spec's below.

Ordered Mk5 kit on March 8, 2026
Ordered processed on March 18, 2026
Received Invoice Email on March 19, 2026, with projected build date of April 25, 2026
Confirmed build configuration on April 6, 2026
Wired payment on April 7, 2026

Kit as configured:
Complete Kit Mk5
Left Hand Drive
SB 351w
TKX transmission
Hydraulic Clutch
351 Headers
Steel side exhaust
Rear suspension IRS forged w/complete kit (free promo)
F&R IRS Shock Set
Power steering
Platinum 6 pc gage set
Vinyl roadster seats
Powder coated frame
Driver side powder coated roll bar
Front/Rear Brakes 11.65"
Wood steering wheel
Cut outs in body
Precut 427 dash
Simpson 3" harnesses
GT300 mirrors
Plastic hood scoop
Sun visors
Roll bar grommets
Front and Rear sway bars
brake reservoirs
Brake booster
Wind wings
Trunk gas strut
Seat track
Assembled side Louvers
Battery cut-off
Brake duct wire mesh
Car cover
17x9 front and 17x10.5 rear halibrands and tires

I will be building a 351w based engine. I haven't decided yet on 351 or 408. I have a 351w that will really dictate the path forward based on how the crank and rods check out. If I have to do much of any work to them, I'll probably go the 408 route.