Jeff33Ford HotRod Build - Fitting Trunk......

[Jeff33Ford]

The day finally came!! The Hot Rod is home. Thought I would at least start the build thread. While not near a proficient as others on this board with words I will at least show progress. Carl Emery from Bando 11 Racing and Transport was awesome with the delivery.

50026 - Complete Base kit
34575 - Powder coated chassis
33462 - Installing Ford 289/302/351W Engine
- Installing Automatic Transmission: (Default configuration)
34050 - 28 spline driveshaft for 302/351W/4.6L/5.0L Coyote with 2015 IRS and T5, AOD, or Tremec 3550 Transmission
16325 - Black Vinyl Roadster Seats
34058 - 2015 Mustang-based Independent Rear Suspension Kit with KONI coil-overs, tubular lower control arms, and CV axles
15945 - 2015-2017 Mustang IRS Manual Driveshaft Adapter
34838 - '33 Grill with Hood and Engine Side Covers
34090 - Hot Rod Spread Rear Exit Exhaust – Polished stainless with 2 oval tips, located under tail lights
33651 - Upgrade: Tilt Steering Column, Paintable
33682 - Soft Top
33694 - Soft top curtains
34075 - Electric Power Assist Steering

IMG_1765.jpgIMG_1767.jpg