Hmm, I cannot get my speedo to register speed. I went through the calibration process, drove a 2 mile distance and it acted the right way all the way through..

- It moves to halfway when power turned on
- it moves to full speed when entering calibration mode
- stays at halfway during calibration (BUT nothing shows on LCD.. seems it should be counting)
- when I stop calibration it shows 16000 on the LCD for a second (which seems to be the default 16,000 pulses/ mile it comes with).

So I'm think it's the sender or the wiring this time.

The sender seemed very easy to fit and wire up to my new TKO600 from Mike Forte at the time - this is a photo I took. I'll lift up the car and take a closer look..

speedo-connection.jpg