e-brake pulley config

[toadster]

to copy the folks who've mastered this mod
https://www.sunshinegaragemkiv.com/c...ncy-brake.html
https://thefactoryfiveforum.com/show...l=1#post106019
https://thefactoryfiveforum.com/show...l=1#post225428

I'm pulling together the common list of parts:


1 x Alloy Steel Shoulder Screw 3/8" Shoulder Diameter, 2" Shoulder Length, 5/16"-18 Thread 91259A632
2 x Pulley for Wire Rope for Horizontal Pull, with Bearing, for 1/4" Diameter, 1-3/4" OD 3434T24
1 x High-Strength Steel Nylon-Insert Locknut Black Oxide, 5/16"-18 Thread Size 97135A416


still struggling to find the Lokar brake clevis (Lok-S-8078) by itself...


other options to keep in mind? I believe many are 'extending' the lower arm to help the clevis clear the frame rail