Center switch console

All of the originals were a little different. But for the most part CSX2286, 2287 and 2299 were like FFR's placement and CSX2601, 2602 and 2300 were high. I like the high placement because I think it Accentuates the uniqueness of the Daytona's Kamm tail.

As much as I like the vintage looks, I also like Pete Brocks newer interpretation with the single reverse light on the left side, so I will be doing this.
A Lot of thought went into the layout I chose along with how the lights ...

I didn't care for the kits corrugated stainless steel hose and instead will be using mostly Ford 4.6L hoses. One Non Ford hose I did need to source (for the Coupes unique configuration) however was the lower Radiator hose.

[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/inertiaswitch0021Medium.jpg[/IMG]

Lower Rad hose to Cold side Thermostat. GATES#465-20603. With a nice bend over the Rack.

[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/inertiaswitch004Medium.jpg[/IMG] ...

Factory Five has a Continuous On going improvement strategy which can be seen with constant kit revisions. Changes to steering geometry have resulted in better Steering Axis Inclination and less “bump steer”. A lot of the improvements have been Customer driven from lessons learned at the track.
Some of the most frequently asked build questions are in reference to the FFR rack and pinion extenders. The purpose of these parts is to extend the pivot point of the inner Tie rod socket, so that ...

[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/Batteryjunctionbox001Medium.jpg[/IMG]
Attached to the X member with a bracket that I fabricated. Still needs to be powdercoated.
[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/Batteryjunctionbox002Medium.jpg[/IMG]

[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/Batteryjunctionbox013Medium.jpg[/IMG]
At first I had it sitting flat, but since it will be under the coolant reservoir I placed it tilted out ...

Stock FFR Firewall
[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/FIREWALL018Medium.jpg[/IMG]

Modification providing additional 3" for evaporator footprint.
[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/FIREWALL030Medium.jpg[/IMG]


Again stock FFR Firewall
[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/FIREWALL022Medium.jpg[/IMG]


Russ Thompson inspired firewall mod.
[IMG]http://i133.photobuc ...