Midwest Classic Insurance

Visit our community sponsor

View RSS Feed

Bobby and Becky's Adventures

  1. I passed 30000 miles on the roadster today.

    The milestone happened on my drive to work. Then it rained and then it thunderstormed and then something unexpected happened. I made a video of the happening :)

    [video=youtube;EdchkeHmYh4][URL]http://youtu.be/EdchkeHmYh4[/URL][/video]


    Bobby
    Categories
    Uncategorized
  2. July 4th 2010 - Blue Ridge Parkway, Great Smokey Mountains, Dragon

    It was a great 3 day getaway for Becky and I. We stayed as guests at Harrahs' Cherokee. We drove the FFR, gambled a little, and ate like royalty. It was awesome.

    A little video to show the roadster in action on our climb out of Cherokee on the Blue Ridge Parkway.

    [video=youtube;y-oN5GjbgHI]http://www.youtube.com/watch?v=y-oN5GjbgHI[/video]
  3. Winter 2010 last part

    I also had to move my mass air meter so I went all out and fabbed up a cold air intake in the fenderwell. I am getting my air from the brake vent and from in front of the front wheel down low. I added a 90mm lightning mass air meter during the upgrade as well.

    [B]My box of unions, angles, and 4" pipe. I bought the supplies from intaketubes.com[/B]
    [IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=848&d=1299210116[/IMG]

    [B]I measured and ...
    Categories
    Uncategorized
  4. Winter 2010 more continued

    Well after the supercharger and intake were painted the poor alternator stuck out like a sore thumb so I disassembled it, painted it, and replaced the bearing just for good measure.

    [B]All torn apart![/B]
    [B][IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=797&d=1299037792[/IMG][/B]

    [B]On the paint table with the valve covers and the discharge tube[/B]
    [IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=796&d=1299037781[/IMG] ...
    Categories
    Uncategorized
  5. Winter 2010 continued

    My explorer intake was looking a little rough so I bought some Summit brand single stage urethane paint and set out to make my top end shiny. The color is a dark metallic silver. It shows off well in the sunshine.

    [B]Intake Sanded[/B]
    [B][IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=789&d=1299036745[/IMG][/B]

    [B]Primed with a urethane catalyzed low build primer[/B]
    [B][IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=787&d=1299036724[/IMG][/B] ...
    Categories
    Uncategorized
Page 1 of 4 123 ... LastLast

FFMetal

Visit our community sponsor