All Blog Entries

[QUOTE=bsnyder;3527]Jake at Club Cobra ([URL="http://www.clubcobra.com/forums/showthread.php?t=108732"]http://www.clubcobra.com/forums/showthread.php?t=108732[/URL]) will be leading the charge on the 2011 NWCC Coastal Cruze . Please see the following for all the details:

When: Aug 19-21st 2011

Where: Starting in Lakewood, WA - at the Park & Ride off SR512 and I-5, ending in Florence, Oregon.

What: This will be 3 days of fun filled Cobra ...

The FFR dash is ok, But I wanted a gauge layout a little closer to the originals.
From what I've seen all 6 of the original Coupes were a little different. CSX2287,CSX2300 and CSX2601 all had the Gauges upper/bottom row stacked directly on top of each other, and all had the speedometer on the passenger side of the dash except CSX2601 which had it in the middle located above the console. And only CSX2299 had the Tach and two small gauges "Staggered" over the bottom three...So my ...

You have 5 main pieces. The center piece, the 2 sides and the 2 supports that attach to the sides and then to the frame.

First make sure your radiator fits under the radiator hold down band. (Some earlier kits required modifications to the lower radiator brackets.)

Next’s it’s a good idea to have the nose mounted so that the radiator duct can be positioned properly for the hood opening and also hood contact.

[IMG]http://i133.photobucket.com/albums/q63/Tyrod2/DuctWork004Medium.jpg[/IMG] ...

For people like me.

So we don't junk up the real blog area. :cool:

Just trying to get the hang of this and see how it links to our existing blog.

[url]www.myersfamilyFFRbuild.blogspot.com[/url]

You'll probably want to set this to 'ignore' until we figure it out. And maybe leave it there even if we do.

[IMG]http://1.bp.blogspot.com/-2FlfL3tqKLU/TVdeQLs23dI/AAAAAAAAAaY/OmzCxLiei-Y/s1600/Sanding+003a.jpg[/IMG]

Whoa, that's a big picture.
John