Bobby and Becky's Adventures
Winter 2010 continued
by , 03-01-2011 at 10:43 PM (1238 Views)
My explorer intake was looking a little rough so I bought some Summit brand single stage urethane paint and set out to make my top end shiny. The color is a dark metallic silver. It shows off well in the sunshine.
[B]Intake Sanded[/B]
[B][IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=789&d=1299036745[/IMG][/B]
[B]Primed with a urethane catalyzed low build primer[/B]
[B][IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=787&d=1299036724[/IMG][/B]
[B]With a couple of coats of the metallic silver urethane. Notice how dingy it made the valve cover look. Then they went on the to be painted list![/B]
[IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=790&d=1299036770[/IMG]
[B]The blower was as cast piece. I sanded it smooth and painted the blower, brackets and the plastic discharge tube.[/B]
[IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=788&d=1299036735[/IMG]
[B]After painting[/B]
[IMG]http://thefactoryfiveforum.com/attachment.php?attachmentid=791&d=1299036781[/IMG]
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
