R Thomas
Gen 3 FFR#48 Type 65 Coupe R Build
by , 12-25-2016 at 04:34 PM (2525 Views)
[QUOTE=johngeorge;260695][img]http://www.johngeorgeracing.com/gallery/_data/i/upload/2016/12/17/20161217104253-d1b3bdf3-me.jpg[/img]
[img]http://www.johngeorgeracing.com/gallery/_data/i/upload/2016/12/17/20161217104256-8d7383de-me.jpg[/img]
the frame jig
[img]http://www.johngeorgeracing.com/gallery/_data/i/upload/2016/12/17/20161217104259-9a186a72-me.jpg[/img]
finally bolting new frame to the rotisserie so Jon can spin the frame upside down to finish weld all the tubes.
[img]http://www.johngeorgeracing.com/gallery/_data/i/upload/2016/12/17/20161217104156-66d80e8d-me.jpg[/img]
[img]http://www.johngeorgeracing.com/gallery/_data/i/upload/2016/12/17/20161217104159-d17e8964-me.jpg[/img]
Jim worked with FFR body shaper John C. to make a type65 coupe splitter for the R coupes. It looks awesome and cant wait to see it fully assembled to the bottom splitter (same bottom splitter as the 818R uses.) This will be sold by Factory Five Racing!
[img]http://www.johngeorgeracing.com/gallery/_data/i/upload/2016/12/17/20161217104301-1bd3f283-me.jpg[/img]
Jim also designed and laser cut brackets to mount the giant Wilwood 6-piston calipers to the 2015 IRS spindle. Minor alteration of the stock spindle are required to make this setup work. Stay tuned for detailed instructions on how to make this work.[/QUOTE]
Tags:
None
- Categories
- Uncategorized
Email Blog Entry
Go to Profile
Mark as Read
