FormaCars

Visit our community sponsor

View RSS Feed

R Thomas

MK IV using a donor

Rate this Entry
[QUOTE=R Thomas;200019]I am going the donor route, sort of, I got a 97 Mustang for a donor for $1700 and figure on using the following parts at least initially. Engine and its wiring, Transmission, Rear Gears, Fuel Tank with stock fuel pump, Front spindles and control arms, Brakes and Radiator. Notice there are only 4 things listed that are not part what is needed for the complete kit. When I bought this car used it was in the following condition, mechanically sound except for brakes, and looked like a piece of junk. The interior looked like an 18 year old bad dream and the exterior was just as ugly. [ATTACH=CONFIG]44906[/ATTACH] I decided early on I had no desire to strip the wiring. I plan to live with the stock 4 link rear. I replaced the brakes (pads, rotors and rear calipers) for around $500 I also replaced the rear control arms with a tubular set that has adjustable uppers for $269. Until I actually get to the kit build the 97 is registered and does duty as my pickup/parts hauler. I also plan to do the initial driving of the roadster in gelcoat.

Wheels and tires came off my 2011 Convertible which got a set of 2014 take offs for $600. So for about $3100 I have a car I can drive when needed and most of the parts I need to get a roadster on the road. There will be no jaw dropping when the hood is openned, but I'm not looking for that. I need the wiring harness and the gauge set for another $1200 and I can be enjoying a roadster. I realize for many of the guys here are building their ultimate car, more power to them. I am building a fun car that handles like a race car and flies with a heavy throttle foot. To each there own. I do have future plans for paint and upgrades including a fresh engine, but it's off down the road.

Best of luck with your build spend time thinking to clearly establish what your goals are before you commit. My son and I also took the time to attend the build school at Mott College in Michigan. The instructors have built many of these cars have a great deal of knowledge and if your one of those questioning can I build this car. That question will clearly be answered.[/QUOTE]
Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Beater1.jpg 
Views:	140 
Size:	36.0 KB 
ID:	44906  
Tags: my build Add / Edit Tags
Categories
Uncategorized

Comments

FFMetal

Visit our community sponsor