PDA

View Full Version : Mk4 Challenge: Fuel Cage Install



StromSpeed
07-27-2012, 05:00 PM
Just received my fuel cage for my fuel cell.
I want to confirm the install as its nowhere in the guide. I see 4 mounting holes on the cage itself (front& back), which appear to mount to the existing locations on the frame, then 2 holes for the strap on top.
But I received 4 brackets (2 pairs) and 12 bolts/nuts. :confused:

Can you provide any additional info on this? Thanks.

StromSpeed
08-01-2012, 11:44 AM
Bump. :-)

David Hodgkins
08-01-2012, 12:03 PM
I've forwarded a link to this thread to FFR for you.

HTH,

:)

johngeorge
08-01-2012, 02:29 PM
my cell mounted in the car (looking from the pass side at the front of the cage):
http://www.johngeorgeracing.com/gallery/albums/seasonprep2012/IMG_4405.jpg

http://www.johngeorgeracing.com/gallery/albums/seasonprep2012/IMG_4406.jpg

back of the cage (trial fit without cage in the frame (new shiny parts)
http://www.johngeorgeracing.com/gallery/albums/2009prep/IMG_0409.sized.jpg

http://www.johngeorgeracing.com/gallery/albums/2009prep/IMG_0410.sized.jpg

johngeorge
08-01-2012, 02:32 PM
more pics
http://www.johngeorgeracing.com/gallery/albums/2009prep/IMG_0428.sized.jpg

http://www.johngeorgeracing.com/gallery/albums/2009prep/IMG_0429.sized.jpg

StromSpeed
08-01-2012, 02:47 PM
I've forwarded a link to this thread to FFR for you.

HTH,

:)

Thank you!!

StromSpeed
08-01-2012, 02:49 PM
Thanks for the pictures! OK front makes sense. Its this back portion that is confusing: so I need to drill a hole for that bottom bolt though the lower tube in the frame, to make the bracket secure? (last picture lower bolt that is not tightened)

johngeorge
08-01-2012, 03:15 PM
No you dont need to drill anything.

There are brackets that you replace the lower bracket that holds the back of the body (lower bolt), the tab on the fuel cell frame lines up with that bracket and you put a bolt through the bracket and the cell tab.

Id take a better pic but the car is at Mark's Dougherty's place.

johngeorge
08-01-2012, 03:19 PM
think this is better pic.. (little bent due to an on-track incident with a wall)

http://www.johngeorgeracing.com/gallery/albums/newbody/IMG_1302.sized.jpg

http://www.johngeorgeracing.com/gallery/albums/newbody/IMG_1297.sized.jpg

http://www.johngeorgeracing.com/gallery/albums/newbody/IMG_1300.sized.jpg

FFRSpec72
08-01-2012, 04:35 PM
John, clean that frame up and you will lose 10 lbs

StromSpeed
08-02-2012, 09:26 AM
think this is better pic.. (little bent due to an on-track incident with a wall)


OK now I got it! Thanks for those pics! :D

vnmsss
08-02-2012, 11:37 AM
John, You rock!!!!

K