Rear Brake Flex Line Bracket Location Option

[Mat1asBEV&ICE]

Hi. I'm trying to decide which of the following two locations will work best for the flex brake line bracket. Important to note, based on my e-brake cable routing is one option better than the other (thinking about interference)? I am running the stock e-brake cables with 2015 Mustang GT 13" rotor and calipers. Thank you!

Option 1, others builders have done this, but I haven't seen it done with e-brake cable in my location.
194979

Option 2, as described in the manual.
194980194981

[michael everson]

I put it on the angled tube that the upper control arm is attached to.
Mike

[DW66]

This is probably where Mike puts his. I might have used a few of his methods:)194982

Dave

[Mat1asBEV&ICE]

Thank you, guys. I was wondering which position would be better when planning ahead for the hard lines.

Dave, would you happen to have a photo of the hard line routing near the flex line bracket? Curious what that looks like. Also, I am getting the RT/Mountain Metalworks drop tank if that makes a difference.

[DW66]

I have a dropped trunk. 194984

Dave

[BRRT]

A few pics. I used flex lines from Pegasus Racing
https://thefactoryfiveforum.com/attachment.php?attachmentid=193855&d=1704043715
https://thefactoryfiveforum.com/attachment.php?attachmentid=193857&d=1704043715
https://thefactoryfiveforum.com/attachment.php?attachmentid=193634&d=1703434684

[Mat1asBEV&ICE]

Muchas gracias.