33 Hot Rod Parts

[Mike1320]

I appear to have extra parts, or I forgot to install something (the more likely scenario). I can't find a location for what measure out to be two 3/4"-16 nuts and four flat washers measuring 1-3/4" OD and 5/8" ID. The washers appear to go with the nuts. Several tours through the manual haven't enlightened me. So far I have the front suspension installed and am awaiting the arrival of a tool set so I can torque the ball joints to the spindles.

Thanks,

Mike

[Brian Z]

Mike,

I took a look through the bill of materials to find nuts that size. It looks like they might be jam nuts for the front control arms or the pan hard bar? Just double check those areas to make sure no jam nuts are missing. I think it is pretty common to have a hand full of parts that you couldn't figure out where they went. It is also possible that we packed a few extra parts by mistake.

Best regards,

[Mike1320]

Thanks, Brian.

I checked the control arms and I have all the jam nuts in place so I'll just keep going and see what happens. If they're for the panhard bar, they'll be extras since i have the 4-link.

Mike