Looking for the post 239 o rings for ffr wheel adapters

[cobrajj]

I can't find the saved bookmark about using a 239 red o-ring to hold the ffr wheel adapter from spinning when tightening the knockoff. I've tried a site: search but nothing. Thanks, Jim

[michael everson]

I use a bead of silicone around the perimeter then a snap ring to hold it all in place

here is a link to McMaster-Carr part # 99142A630
https://www.mcmaster.com/catalog/128/3618/

[egchewy79]

I can't find the saved bookmark about using a 239 red o-ring to hold the ffr wheel adapter from spinning when tightening the knockoff. I've tried a site: search but nothing. Thanks, Jim

I got mine off amazon, but look for 329 silicone O ring in instead of 239. Looks like amazon is out right now.

[egchewy79]

i stand corrected

https://www.amazon.com/329-Silicone-Ring-Durometer-Width/dp/B000FN0YKI/ref=sr_1_3?crid=1U2P3FGGNGSDS&keywords=329+o+ring&qid=1644617785&sprefix=329+o+ring%2Caps%2C223&sr=8-3

[cobrajj]

Thank you for the correct number!

[totem]

https://thefactoryfiveforum.com/attachment.php?attachmentid=89641&d=1532995466

[jrcuz]

https://thefactoryfiveforum.com/attachment.php?attachmentid=89641&d=1532995466

Looks like totem got the same as I did. I got mine from The O-Ring Store . I got 10 #S70329 for $7.20 shipping was almost as much at $6.29 to Va.
JR