Windshield cut outs

[Kodiak]

Anybody have a measurement of the cut outs for the windshield. Where the windshield fits through the body ?

[frankeeski]

Don't remember the last time we ordered one without body cutouts but even in the assembly manual it says the holes on either end are drilled before they leave F5R.
https://thefactoryfiveforum.com/attachment.php?attachmentid=146637&d=1619027560
https://thefactoryfiveforum.com/attachment.php?attachmentid=146638&d=1619027586

[Kodiak]

Thanks Frankeeski for the reply.Body cut outs were ordered but these were forgotten. There is no holes drilled or marking of any kind of where they would go.Looking for x and y dimensions.

[Jeff Kleiner]

This will get you a starting point and then you'll have to fine tune them from there.

Driver's side:

https://thefactoryfiveforum.com/attachment.php?attachmentid=146643&d=1619031527

Passenger side:

https://thefactoryfiveforum.com/attachment.php?attachmentid=146644&d=1619031557

Note that they are not the same side to side in relation to the parting lines.

Jeff

146643

146644

[Kodiak]

That’s what I was looking for. Thanks Jeff