brewha
10-16-2019, 01:28 PM
I’m in the process of prepping the body to get it to a painter. I was pretty happy with the exhaust cutouts and drove the car for awhile without thinking about changing it. When I decided to start the body work I took the body off the car so dust would not be an issue getting into the interior or engine compartment
.
To remove the body, I had to take the exhaust off as there wasn’t enough clearance when lifting the body near the exhaust cutouts. I started thinking that I’ve had the body on and off at least 4 times and each time I had to remove and re attach the exhaust pipes.
Do I have my exhaust cutouts too tight? Does anybody not have this issue? If I widen the cutouts will the body lift off with the exhaust on?
.
To remove the body, I had to take the exhaust off as there wasn’t enough clearance when lifting the body near the exhaust cutouts. I started thinking that I’ve had the body on and off at least 4 times and each time I had to remove and re attach the exhaust pipes.
Do I have my exhaust cutouts too tight? Does anybody not have this issue? If I widen the cutouts will the body lift off with the exhaust on?