View Full Version : Outside to outside length of the sway bar Please!
Brd.Prey
05-18-2019, 07:59 PM
My sway bar is too long it doesn’t fit inside if the spindle bracket.
Thanks ahead of time
walt555
05-18-2019, 09:18 PM
Please post a picture of your bar.
Brd.Prey
05-19-2019, 02:24 PM
Please post a picture of your bar.
107601
Mitch Wright
05-19-2019, 03:28 PM
A few others have posted that aftermarket rear (818 front) bars won't fit. What I recall is they are about an 1 inch + too wide.
Brd.Prey
05-20-2019, 04:22 AM
yup!
Mitch Wright
05-20-2019, 08:04 AM
Building a bar isn't that tough if you want to take it on.
Here is the rate calculator I used when building mine. http://www.gtsparkplugs.com/Sway-Bar-Calculator.html
I was able to use the FFR links (Cut down) and some of the hardware. The rest I got from Merlin Racing https://www.merlinmotorsport.co.uk/s/suspension-steering/associated-suspension-parts/anti-roll-bar-components-and-spares
Beware the sway bar mounts on the chassis are not the same height. Not a big deal the pads are big enough to raise the low side to level the bar.