Oil Pan for 331 in Daytona Coupe

[TheBabyBadger]

Are there issues running ANY oil pans on a 302/331 build for a Daytona Coupe? I was planning to run a higher capacity road race pan by Canton. Thanks!

[Gordon Levy]

I have several road race pans to fit that engine in these cars quite well.

[edwardb]

Based on what I've seen with my Coupe build, same guidelines as used on the Roadster applies. Max pan depth of 7.5 inches. Anything deeper is liable to hang below the frame.

[TheBabyBadger]

Thanks guys!

[TheBabyBadger]

I have several road race pans to fit that engine in these cars quite well.

Checking out your stuff now!

[TheBabyBadger]

Hey Gordon... Happen to have some race baffled oil pan pics...? Checked the sign but couldn't find any!

[David Williamson]

if it is a Gen 3 coupe it has to be a rear sump oil pan to fit in the frame
david W

[Gordon Levy]

You can go to my FB page at facebook.com/levyracing and you can see tons of pics. I only use proper road race pans.

[TheBabyBadger]

Roger that, thanks Gordon!