Wagon LCA not lining up?

[turbomacncheese]

wagon donor, I'm supposed to use the outer holes. The front mount....
77108
But then the rear mount wants to pull in to the inner hole.
77109
Do I pry this thing over?
FYI this is the passenger side, same issue on the driver side.
Thanks

[EODTech87]

It's just the mounting points not being perfectly square or straight. I remember having to man handle the front control arms into the correct holes as well.

[turbomacncheese]

Thanks. I'll go handle them like a man.

[Bob_n_Cincy]

This was my picture 4 years ago with wagon LCA..
I had to modify the holes.
Bob
77112

[flynntuna]

Thanks. I'll go handle them like a man.

Lol , triggered some funny pictures in my head.

[turbomacncheese]

This was my picture 4 years ago with wagon LCA..
I had to modify the holes.
Bob
...
Thanks Bob. I figured it had to do with how the brackets were set up, but I wanted to check before I bolted them up. I expected this project to challenge my skills, and it is. I've found it has also challenged some of the things I thought I knew. Not going to take a chance on something I know I don't know, especially when it's so easy to get help here.


Lol , triggered some funny pictures in my head.
That's my goal!!