Anybody have a trick to get the stock shift linkage off?

[Chef818]

Knocked the pin out, but can knock the linkage off, any tricks?

[Bob_n_Cincy]

Knocked the pin out, but can knock the linkage off, any tricks?
Mine had a double pin. One was about 5/16th and another inner one was 3/16th.
Did you get them both out?
Then I just tapped off the linkage bracket.

here is a video!

https://www.youtube.com/watch?v=grXWH4ujpBM

Bob

[phil1734]

http://imgur.com/UAktKmk

[Chef818]

Thank you! that was the key, was not aware there was 2 pins.