romraider settings

[rplourdejr]

Does anyone know how these settings work, in rom raider?

My car doesn't have that black rectangular box that is usually hooked up to various hoses and such, forget what it is called.

I am trying to figure out what P codes I need to turn off, so I do not get a check engine light.

Do I just turn on all these, so I don't get all these codes?

55597

Rob

[redfogo]

To see what check engine lights are on you need to use rom raider logger. Then in the logger there is an option to see what check engine lights are on. Rom raider editor can't tell you what's on from my understanding.

[STiPWRD]

Your best bet is to read what codes you have and then disable them. I'm not sure if the black box you're referring to is the evap system but you could try turning off the evap codes as well:

0442 Evap control system leak detected (small leak)
0444 Canister purge control solenoid valve circuit low
0445 Canister purge control solenoid valve circuit high
0447 Evap control system vent control circuit open
0448 Evap control system vent control circuit short
0456 Evap control system leak detected (very small leak)
0457 Evap control system leak detected (fuel cap loose/missing)

[rplourdejr]

Yes, the evap system. could not remember the name.

Anyway, I am currently getting p1086 and p0183 codes, so far. Might get more if I drive it around, but I have not passed safety and emissions yet, so don't want to drive it too far.

[rplourdejr]

fuel temp, is a sensor on the tank, which is not there...what is TGV? Is that part of the evap system?

[ssssly]

Tumble generator valves are part of the intake manifold.

If your car has a turbo, it has TGVs.

[ssssly]

JDM cars have TGVs.

The only cars that come with long runner, non TGV intake manifolds are the spec C and S203/4.

Deleting the TGVs is a popular modification. So your donor may have had them removed. You should check though. Unplugging the TGVs if they are still present is not advisable.

[rplourdejr]

Guess I better leave that one. Does anyone know what the wiring connector and the device looks like? I am pretty sure my car doesn't have any mods to it, so I should have this. It has got 168K miles, so maybe I need something fixed?

[rplourdejr]

fuel temp, is a sensor on the tank, which is not there...what is TGV? Is that part of the evap system?

Is P0183 a sensor on the tank? Now I am starting to second guess things. I tried setting off 0183 and 1086 and that gave me a whole bunch more, including misfires on all 4 cylinders.

[K3LAG]

I have been turning mine off as they show up. So far I have turned off P0183, P0447, and P1400. No others have shown up so far. I do have the purge valve installed at the manifold to purge my GM charcoal canister.

Larry