View Full Version : Single Clutch/Brake Reservoir?
Solidworks-Mike
06-03-2016, 05:07 PM
The kit only came with one reservoir, so can I tee the clutch master cylinder into the brake cylinder feed lines and have all three share the same reservoir?
https://c6.staticflickr.com/8/7433/26783283453_1067146659_b.jpg
https://c6.staticflickr.com/8/7433/26783283453_1067146659_b.jpg
michael everson
06-03-2016, 05:12 PM
You can, but its probably not he safest solution. Maybe get another from FFR and used one for the back brakes and clutch. Use the other for the front brakes.
Mike
Solidworks-Mike
06-03-2016, 07:33 PM
You can, but its probably not he safest solution. Maybe get another from FFR and used one for the back brakes and clutch. Use the other for the front brakes.
Mike
Great Suggestion. I can always redesign the mount for two reservoirs and print it.
Mitch Wright
06-03-2016, 09:00 PM
I have the one that came with my kit that I am not going to use.
GoDadGo
06-03-2016, 09:12 PM
I purchased a TILTON unit which has three (3) individual reservoirs, but it's a one (1) piece design.
If I'm not mistaken, I think I got it from Summit Racing or Speedway Motors for about $100.00.
Also, you can get it with either regular hose barbs or screw on fittings.
Solidworks-Mike
06-03-2016, 10:28 PM
I have the one that came with my kit that I am not going to use.
Let me know if you'd like to sell it.