PDA

View Full Version : Front LCAs - an inauspicious start


Kafka_Esquire
05-22-2016, 04:29 PM
I unpacked my front LCAs today and step one was to insert the zerk fitting using a 5/16" wrench. The zerk is round, but the holes into which I am supposed to insert the zerks (for both LCAs) appear to be be slightly oval. The zerk will not go in, and I do not want to push it for fear of stripping it. Has anybody else experienced this and if so, how have they addressed it?

Best,

Brian
wallace18
05-22-2016, 04:56 PM
Figure out what is the correct tap size and tap the LCA's. That is what I did.
Kafka_Esquire
05-23-2016, 07:18 AM
Figure out what is the correct tap size and tap the LCA's. That is what I did.

Thanks. That worked.