Pearldrummer7
02-29-2016, 08:05 AM
Hopefully I'm allowed to post this here. I'm not being paid to write this, but I feel like Sgt Gator needs a shoutout for providing such a great (and cheap at $15) tool to install differential, cam, and crank seals.
Did cam seals and timing. Well, almost. I found that the rear timing cover was cracked and I am going to replace it before putting my new belt on. Cam and crank seals well well, especially thanks to my fancy seal install tool, courtesy Sgt Gator. Thanks man!
https://farm2.staticflickr.com/1571/24747794413_13d0c7f263_c.jpg (https://flic.kr/p/DGSV5z)
It also even slides the crank gear on nicely. This thing fits everything! 10/10 would buy again. Word of caution: use a rubber mallet; I chipped a piece off using a regular hammer. It is a very cool tool and I will not being doing seals without one lying around.
Did cam seals and timing. Well, almost. I found that the rear timing cover was cracked and I am going to replace it before putting my new belt on. Cam and crank seals well well, especially thanks to my fancy seal install tool, courtesy Sgt Gator. Thanks man!
https://farm2.staticflickr.com/1571/24747794413_13d0c7f263_c.jpg (https://flic.kr/p/DGSV5z)
It also even slides the crank gear on nicely. This thing fits everything! 10/10 would buy again. Word of caution: use a rubber mallet; I chipped a piece off using a regular hammer. It is a very cool tool and I will not being doing seals without one lying around.