Deleting airbag components

[Hindsight]

I started on the wiring today and have a quick question. I want to remove everything airbag related if possible. This means the crash sensors, ABS control module, and obviously the airbags themselves. I have everything labeled and know what needs to be removed, but I don't want the airbag light to be on in my cluster. Before I start hacking at this wiring harness, do I need to ground or bridge some wires and/or add resistors in places to trick the system, or is there an easier way to just disable the light at the cluster?

Thanks!

[K3LAG]

Depends on what year your donor is. On early cars you don't have to do anything. On later cars you either have to ground or provide 12v I forget which to a pin on the cluster. There was a bunch of discussion on the forum about this last year but I don't remember where. Fortunately I had an early one.

Larry

[Hindsight]

Thanks for the reply; mine is a later model (2007).

[RM1SepEx]

Brian from iWire sent me a doc file to shut off the brake light and the airbag light. PM me your email and I can email you our discussion. You just have to short a pin in the connector...