Who has the brake line parts list for Wilwoods?

[longislandwrx]

I did some searching but I couldn't find it... need to order my brake lines and fittings.

What do I need to hook the factory five supplied lines to my Wilwoods without using the pink adapters to connect to the flex lines?

Thanks in advance!

[Frank818]

These need the pink adapters or not?

http://www.wilwood.com/LineKits/LineKitsProd.aspx?itemno=220-7009
http://www.wilwood.com/LineKits/LineKitsProd.aspx?itemno=220-7010



Otherwise, what 508Stroker said a while back:


Brake lines with Wilwood 12/12.19 without metric/std adapters
We went to Capital Motorsports (cmwraceparts.com) and the following is the setup that worked for us for 2004 WRX donor

2 ea XRP402603 -3 to 3/8-24 male to female fittings (packs of 2)
4 ea XRP981603 -3 to 1/8in Pipe Straight Fitting
2 ea SBL318 18in -3 Brake Line
2 ea SBL316 16in -3 Brake Line

The cost is about $90 for everything, though you could save about $17 if you want to use the fittings from the kit and delete the first item in the list above. I purchased them because they allow us to run the brake lines directly into the fittings without using the metric adapters.

[longislandwrx]

thanks Frank, that's a good start, WRX uses M10 x 1 IF so anything marketed for WRX would need the pinks.

appreciate the post.

[insurance guy]

thanks Frank, that's a good start, WRX uses M10 x 1 IF so anything marketed for WRX would need the pinks.

appreciate the post.

now I know why my brake lines leak