ncbuilder
05-01-2015, 08:21 PM
Can anybody tell me how many inches of travel is available in the rear end. What I am asking is total travel from the car being bottomed out to the point that the wheel lifts off the ground when the rear is jacked up by the frame.
I am also wondering if anybody can tell me if there is and rear bump steer , or has Factory Five taken care of this so there is not degree of change from top to bottom of travel.
I am guessing that there have been many hours of CAD time invested in getting the geometry as close to perfect as possible. Chime in with your comments and figures.
I am also wondering if anybody can tell me if there is and rear bump steer , or has Factory Five taken care of this so there is not degree of change from top to bottom of travel.
I am guessing that there have been many hours of CAD time invested in getting the geometry as close to perfect as possible. Chime in with your comments and figures.