AWIC Bleeder Valve?

[metros]

I know several of you have added bleeders to the A2w intercooler core for ease of bleeding. Can you share details on what bleeder you used and where you tapped the core for the bleeder?

Thanks

[Bob_n_Cincy]

I know several of you have added bleeders to the A2w intercooler core for ease of bleeding. Can you share details on what bleeder you used and where you tapped the core for the bleeder?

Thanks

I added 2 ports to the drivers side of my awic.
39644

I will mount a small tank in the drivers side hump.
39645

The bottom port will go to the bottom of the tank.
The top port will go to the top of the tank.
Both with 1/4" id clear hose.
My awic system is non-pressurized.
Pump will be down low going to the lower heat exchanger port.

Fill it up slowly at the tank with the pump running and your done.
Bob

The port showing on the top is where the AIT sensor will go

[K3LAG]

Wayne recommended and I used Dorman part number 902-112 which I got in a package of two from advanced auto for about $10.

Larry

[metalmaker12]

I used the same and a filler cap inline

39648

[Mechie3]

Here's a push button version online.

http://www.jegs.com/i/JEGS-Performance-Products/555/51108/10002/-1

[metros]

Found one from Moroso with the same concept. Thanks for the recommendations guys.