pedal box bracket?

[Lumpyguy]

got a question on the pedal box bracket, I am using 5/16 bolts to install it but noticed that when I go to install the aluminum panels again to verify fitment the holes between the aluminum panel and the bracket dont line up?!? is this normal? grind/drill holes to fit pedals?

also I noticed the 3 5/16 bolt heads sticks out on the top of the pedal box bracket and interfer with the aluminum panel from sitting properly?

cant seem to find this step in the manual.

[FFRSpec72]

No issues here with the 5/16 bolts, I was missing the bracket at ship time and had to call and get them to send me one, not sure if they have updated this or not, but I did not have to drill anything out to have it fit

[Hindsight]

I had the alignment issue too. I ground the sheet metal out to match bracket holes. Didnt have bolt intereference though... Did you use the rounded head allen bolts? They stick out less.

[Lumpyguy]

it was the 5 bolts that hold the bracket to the frame (the one you have to put on before the aluminum panels) I did go to the rounded head bolts and it works better. I to will have to ream out the panel a bit to match bracket. GIT ER DONE!!!!!!! LOL

[Hindsight]

Check my recent post on the build tips thread for a note about the bracket alignment before riveting that panel on.