Suspension parts verification

[FFRSpec72]

So I need to refurbish my 2002 WRX suspension parts with new tie rod end, CV boots and wheel bearings, so looking around and not a Subaru person, here are the parts I came up with, can anyone verify?

1. Tie rod ends: MOOG Part # EV800361 {#34160AE010} Front Inner
2. Tie rod ends MOOG Part # ES3712 {#34141AA041, 34141AA042, 34141AC010, 34141AC0109E, 34161SA000, ES3692} Problem Solver Front Outer; Incl. powdered-metal gusher bearing to allow grease to penetrate bearing surfaces
3. Front wheel bearings: TIMKEN Part # 517008 Front
4. Rear wheel bearings: TIMKEN Part # 513248 {#28016AA030} Tapered Bearing Rear; Standard
5. Front Outer CV Boot BECK/ARNLEY Part # 1032941 {#FA5022530} Front Outer B
6. Rear Inner CV boot BECK/ARNLEY Part # 1032824 {#1032454, 1032613, 1032787, 28023AA011, MB936162, MB936667} Rear Inner

[Somerset Subaru]

Missing a bunch of seals and clips for the wheel bearings.

Just a heads up.

I do have wheel bearing kits ready to rock out the door.

-Adam

[FFRSpec72]

Missing a bunch of seals and clips for the wheel bearings.

OK, PM sent as I will be need some other parts

[mxl]

INNER TIE ROD - (34160FE010),
OUTER TIE ROD - (34161SA001),
BEARING FRONT - (28316FE000),
BEARING SEAL FRONT OUTER - (28035TA040),
BEARING SEAL FRONT INNER- (28015AA080),
REAR WHEEL BEARING - (28016AA030),
HUB SEAL REAR OUTER - (28015AA090),
HUB SEAL REAR 1 - (28015AA100),
HUB SEAL REAR 2 - (28015AA110),
FRONT OUTER CV BOOT - (28323FE001),
REAR INNER CV BOOT - (28423FE000),
These are all the OEM genuine part numbers for a 2002 wrx of the parts you were asking, + all the bearing seals you need to do a proper job, because once you press the bearings out the seals just tear apart. I'm from Canada and here the Subaru dealerships are crooks, so I buy all my parts on Subaru websites... even with the shipping and duty fees I still get them for half price... Hope it help's you

[mxl]

PS: the bearing clips you can reuse the old ones, they are still very good...