PDA

View Full Version : WTB front axle for 2005 WRX



DMC7492
01-20-2014, 11:37 AM
Hi Guys My front outer CV on my donor is trashed. and the inner is also.
I am looking for a inner and an outer front cv joint for a 2005 WRX. Any body have any laying around?
The scrap yard says the WRX is different than a regular Impreza.
Thanks Don

Somerset Subaru
01-20-2014, 11:49 AM
I can get Front CV axles for it. Reman'd right from Subaru. $158.77 plus shipping. There is a $40.00 core that is included so send the old one back and get a $40.00 credit return.

Also these are kept here in stock.

Bob_n_Cincy
01-20-2014, 12:14 PM
Hi Guys My front outer CV on my donor is trashed. and the inner is also.
I am looking for a inner and an outer front cv joint for a 2005 WRX. Any body have any laying around?
The scrap yard says the WRX is different than a regular Impreza.
Thanks Don

Hi Don
The WRX front outer CV joint is not used on the 818. Just the stub off it.

You will need a front inner CV joint and a rear outer CV Joint. FFR supplies the Axle shaft to go between those joints.
Hope this helps.
Bob

rori
01-20-2014, 12:19 PM
I have a front inner joint for you. I had to swap to female joints for my LSD. I saved this male inner just in case someone needed it. Send me a PM

DMC7492
01-20-2014, 12:44 PM
Thanks Bob, That is the part that is bad. The area of the CV joint that supports the inner bearing. Must have been run loose.

DMC7492
01-20-2014, 01:14 PM
Whooa!! I just read all the LSD combinations and the need for proper Inner CVjoints.
I plan on running the Cusco and now I will need the inner joints to work with the Diff. Ill need to research this a little more. Don

RM1SepEx
01-20-2014, 01:20 PM
I had the same issue. I have a good set of 2005 wrx axles. I had to buy rebuilt 02-04 axles from NAPA because I used a Quaife... NAPA only reconditions stock Subaru OEM axles so the splines will match