View Full Version : Radiator Hose Adapter Set
JeromeS13
12-19-2013, 04:21 PM
Does anyone know where I could source these myself? I'm not getting a warm and fuzzy feeling that I'll be seeing these anytime soon... This is the primary thing that is preventing me from starting the engine and go-karting.
Thanks!
-Jerome
If it is the same adapter set that FFR uses for the Roadster, then I can help you out. Rubber sleeves?
Olli
JeromeS13
12-19-2013, 04:37 PM
If it is the same adapter set that FFR uses for the Roadster, then I can help you out. Rubber sleeves?
Olli
Yes, sir. I'm not 100% sure of the diameters, though. I can measure when I get home.
Here's what they look like. There are 5 sets of them (inner and outer).
http://i157.photobucket.com/albums/t43/JeromeS13/HoseAdapters_zps4377de3b.jpg (http://s157.photobucket.com/user/JeromeS13/media/HoseAdapters_zps4377de3b.jpg.html)
Mechie3
12-19-2013, 04:40 PM
I bought some silicone couplers on Ebay.
wallace18
12-19-2013, 05:32 PM
Speedway sells them too.
JeromeS13
12-19-2013, 05:45 PM
Would this be all that I need (x 5)? It looks like it has the inner and outer adapters. Is 2" out and 1.5" inner correct?
http://www.speedwaymotors.com/Hose-Adapter-for-Steel-Flexible-Radiator-Hose-Kit-to-2-Inch-Outlet,2494.html
Do you need the flex line as well? If yes, what length? I have some of that as well.
Olli
JeromeS13
12-19-2013, 05:50 PM
Do you need the flex line as well? If yes, what length? I have some of that as well.
Olli
Negative. I have the flex line. I just need the adapters. Thanks, though!
AZPete
12-19-2013, 09:50 PM
I have them. PM sent.
wallace18
12-20-2013, 05:56 AM
Would this be all that I need (x 5)? It looks like it has the inner and outer adapters. Is 2" out and 1.5" inner correct?
http://www.speedwaymotors.com/Hose-Adapter-for-Steel-Flexible-Radiator-Hose-Kit-to-2-Inch-Outlet,2494.html
Yes that is them.
Guess that you don't need them anymore....AZPete took care of you. Hey, I offered.
Olli
JeromeS13
12-20-2013, 10:39 AM
Guess that you don't need them anymore....AZPete took care of you. Hey, I offered.
Olli
I greatly appreciate it, too!
RM1SepEx
12-20-2013, 11:37 AM
If you use 1/2 of the radiator hose instead of the connector you can get away with 4, 1 at each of the aluminum tube ends. The manual shows the lower hose engine connection both ways...