Boig Motorsports

Visit our community sponsor

Coupe #635 Build Photos

Page 1 of 11 123 ... LastLast
  1. Gen 2 header for 351W
  2. 351 header cut for alteration
  3. Hub with steering wheel detached
  4. Steering wheel and hub completed 1
  5. Steering wheel and hub completed 2
  6. 0.20 sheet aluminum piece cut for steering wheel cap
  7. 0.20 sheet aluminum piece rolled
  8. Steering cap snuggly fit to steering wheel
  9. New steering wheel holes drilled and countersunk
  10. NRG front hub mounted on steering wheel
  11. New steering wheel bolts cut flush with the hub
  12. FFR hub attached to RT hub after counter-sinking bolts.
  13. RT-supplied bolts cut down to sit inside the hubs.
  14. Front NRG hub attached to FFR steering wheel, using jig and hardware-store supplied flat-head bolts.
  15. NRG rear half bolted to FFR hub.
  16. Grinding down NRG front half to match depth of rear half.
  17. Counter-sinking FFR hub's original bolt holes.
  18. NRG rear half with back lip cut out and ground down, using the plastic jig.
  19. Alternate method to fix NRG rear half to FFR hub without jig.
  20. Fitting NRG rear half to FFR hub with jig.
  21. Top side of NRG SRT-400 hub as supplied.
  22. Bottom side of hub.
  23. Horn electrical connectors removed.
  24. Front portion of dashboard installed and finished.
  25. Electrical and center console projects completed.
Showing photos 1 to 25 of 254
Page 1 of 11 123 ... LastLast

FFMetal

Visit our community sponsor