Boig Motorsports

Visit our community sponsor

25th Anniversary MK4 "Quarter Past Half Time Machine" Build: Wiring Begins...

Starting to pre-install the wiring harness and fuse boxes.

  1. Fuse block drilled and cleco'd. I did add a bracket to support it in the corner.

  2. Spaghetti.

  3. Working through the planning of the wire mess.

  4. More split loom. Credit to i.e.427 (Frank) on the tip to buy them from Harbor Freight. Thanks Frank!

  5. Beginning fuse box layout.

  6. Fuse panel brushed and Protecta Clear added.

  7. Pre-placement.

  8. Additional fuse block for Stereo, lighting and other accessories.

  9. Tranny tunnel view.

  10. another view of driver side. I'll be doing the same on the passenger.

  11. Rear view

  12. More views of under the trunk area.

  13. How many holes have I drilled?

  14. Adding cushion clips through the transmission tunnel.

  15. Adding cushion clips through the transmission tunnel.

  16. Adding cushion clips through the transmission tunnel.

  17. Doubling-up the clips since there will be lots of wiring coming through on both sides.

  18. I went with cushion clips due to keeping them secure and safe.

  19. Adding clips for electric e-brake.

  20. Passenger side e-brake wire clipped-in.

  21. Driver side e-brake wire clipped-in.

  22. Routing wire to e-brakes.

  23. Routing wire to e-brakes.
Showing photos 1 to 23 of 23

FFMetal

Visit our community sponsor