FormaCars

Visit our community sponsor

25th Anniversary MK4 "Quarter Past Half Time Machine" Build: Lower Dash Console Kickout

Lower dash kick-out for the stereo, vents and various switches, knobs and do-dads or do-moms. :P

  1. Beginning to route the wire looms.

  2. I think I'll need to drill another hole or two?

  3. Figuring out the placement.

  4. Driver side view, still in pre-phase.

  5. Passenger side view.

  6. looking good! (*Note, the gap is because it is not screw/riveted down as of yet.)

  7. Creating passages for the wires to enter.

  8. that should work nicely.

  9. Line up those grommets!

  10. Drilling the holes.

  11. Early test setup.

  12. Picture after cutting the transmission cover.

  13. Inner view, still working on the vented sides.

  14. Parts waiting for final sanding and Protecta clear to be added.

  15. I built this jig to simulate it being on the transmission cover.

  16. Added it in, very early stage still.

  17. Parts and pieces breakdown.

  18. It's coming together.

  19. Trying to get and keep the tolerances extremely tight.

  20. Stereo opening cut-out

  21. Cutting stereo opening

  22. Driver side template

  23. Passenger side template

  24. Aluminum pieces layout
Showing photos 1 to 24 of 24

FFMetal

Visit our community sponsor