Infinitybox

Visit our community sponsor

25th Anniversary MK4 "Quarter Past Half Time Machine" Build: Chassis Dolly and Body Buck

25th Anniversary MK4 "Quarter Past Half Time Machine" Build: Chassis Dolly and Body Buck Construction

My main goal was to up-cycle as many supplies I had laying around. Sure, I did buy some new 2x4's and some specific hardware for added strength, but in an era of conserving and maximizing the value of something, and saving a few $$$'s along the way, then I'm in! I do plan to re-up-up-cycle these pieces of wood after I'm done with the build. I've always wanted a to make a bench/shelf area for my: jack stands, floor and transmission jack's, oil pan station, etc... These boards & posts will work perfect and I already planned for the needed lengths for that next phase, when I was building the dolly!
(Plan > Measure Twice > Cut :)

  1. 21_Fathers Day Gift-2019

  2. 20_Ready to Assemble-20200113

  3. 19_Ripped and Ready-20191124

  4. 18_Building Buck Frame-20191119

  5. 17_Body Buck Frame Pieces-20191119

  6. 16_Ends Padded-20191118

  7. 15_Buck Ends-20191116

  8. 14_Paused at this portion of the cut to take a moment and savor what was happening-20191116

  9. 13_Transfer Plan Layout-20191116

  10. 12_Body Buck Plans-20191116

  11. 11_Docking Bay #19 (I added tie-downs and extended boards, which will act as not only points to pull with a rope, but also will be able to set a 2x4...

  12. 10_Upcyle Old Blue Jeans-20191116

  13. 09_Cushion Support-20191116

  14. 08_Frame Holders-20191116

  15. 07_Adding Tie Downs-20191116

  16. 06_A Little Higher-20191110

  17. 05_Build it to last-20191110

  18. 04_Measure Twice-20191110

  19. 03_Sharing a Root Beer with friend-20191110

  20. 02_Bee Good Buddy-20191110

  21. 01_Supplies-20191109
Showing photos 1 to 21 of 21

FFMetal

Visit our community sponsor