Hey Y'All,

This Weekend I spent working on my Console leather some more. I chose to work on gluing the leather onto the mounting flange inside surfaces in pairs so that I could control what I was doing better. I also used a big-box-store small container of Weldwood with a built-in brush for each of the flanges instead of spraying the glue. This meant it took me the better part of the Weekend to finish...details, details!

Here's a picture of the flanges wrapped on the inside with leather

console leather inside flange detail.jpg

Then I made sure the leather covering all the screw holes was reamed out, and checked the fit onto the car again -- tight fit, but still fits

confirming upholstered console still fits.jpg

I'll still need to wrap the inside of the Console with leather (which means cutting, folding, and gluing the material back behind the panel opening first) and eventually condition it...but that'll wait for next Weekend (when the adhesive fully cures...I hope)

Craig C